When purchasing and using Mechanical Seals, users should always pay attention to the following work requirements to avoid unnecessary quality management problems for students:

1. In production, after strict selection and long-term experience accumulation, we have produced a series of supply channels for mechanical seals. Our supply is the most comprehensive sealing industry, so we can control the production quality very well. , to maintain a certain level of stability and quality. The mechanical seal is a device for preventing fluid leakage, which is formed by at least one pair of end faces perpendicular to the rotation axis, which keep fit and relatively slide under the action of fluid pressure and the elastic force (or magnetic force) of the compensation mechanism and the cooperation of the auxiliary seal. A shaft sealing device for rotating machinery. Such as centrifugal pumps, centrifuges, reactors and compressors and other equipment. Since the transmission shaft runs through the inside and outside of the equipment, there is a circumferential gap between the shaft and the equipment, through which the medium in the equipment leaks out. If the pressure in the equipment is lower than atmospheric pressure, the air leaks into the equipment, so there must be a Shaft seal to prevent leakage. The elastic loading mechanism and auxiliary seal of the mechanical seal are the mechanical seal of the metal bellows, which we call the metal bellows seal. In light-duty seals, rubber bellows are also used as auxiliary seals. The elasticity of the rubber bellows is limited, and a spring is generally required to meet the loading elasticity. "Mechanical seal" is often referred to simply as "mechanical seal". In addition, we insist on quality seals and will not blindly pursue high profits at the expense of customers' requirements for seal quality.

2. Storage If we produce stamps from the customer's point of view, we must pay attention to whether the supplier or stamp shop knows how to store the stamp. If the supplier does not store them properly, they may be discarded because there is a specific set of requirements for storage seals. For example, the storage room temperature should be lower than 30 degrees Celsius to avoid high temperature aging of the seals; the seals must be stored in airtight packaging to avoid contact with moisture or dust in the air; the seals must be protected from strong light exposure to avoid air Ozone attack or premature aging. Therefore, we recommend that customers should check that the seals are stored correctly when purchasing from suppliers. Otherwise, no matter how high-quality seals the seal manufacturer can provide, it will only be possible to deliver obsolete seals to the customer.

3. Design While using a high-quality seal, many corporate customers can choose lower-grade products in the guide and dust-proof links in order to reduce environmental costs. In case of leakage of material damaged tie rod seals, please advise us on technical products from consulting companies to avoid wasting high quality seals.

4. Installation The most important thing when installing seals is to avoid damage to the seals caused by the company. In addition to some suitable smoothness, safe chamfering, deburring, and appropriate tools, during the installation and how to effectively avoid the occurrence of Dust drifts on the surface of the seals, when installed such as piston seals, how to avoid crushing the seals by proper placement, clean hydraulic technology media, etc. If the student user needs to have any questions about this, we can provide it in China My seal manufacturer knows its own simple installation management guidelines.

5. When using, after many supporting users complete the process, even if the equipment has passed the test, there will be problems after sending it to the user for a period of time. Generally speaking, it may be caused by improper use, for example, the oil temperature is too high. If the seal is burned out, you can check whether the cooling system is working normally, whether the surface of the tie rod is worn and leaking, whether there is debris in the hydraulic oil, and whether the filter is invalid. As can be seen from the above, even if users are willing to pay a higher price for the purchase of high quality seals, it is necessary to control and monitor all aspects to ensure that the investment is not wasted, and to ensure that a professional manufacturer is selected, it is necessary Build a long-term partner.